Oil seal is known as rotary shaft seal. They are often called grease, fluid, dirt or lip seal. Oil seal is an integral part in any rotating and moving part assembly.
They close spaces between stationary and moving components in mechanical equipment. In most applications, the seal is either partially or temporarily immersed or is simply exposed to splashing lubricant, particularly in engines, transmissions, gearboxes or axles. They are vital components of almost every type of machine and vehicle in operation. An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. The function of a seal is to prevent the leakage of medium along the moving parts. This is mainly achieved by the sealing element.
Technical data
Temperature: -40°C / +200°C Depending On Material
Pressure: Up to 0.05 MPa
Speed: up to 25 m/s
Medias: mineral oils, water, lubricating grease
Rubber: NBR/FKM/HNBR/PU/fabric rubber
Spring: Carton Steel
Application
The seals are used in a full range of equipment in the following industries:
• Automotive.
• Manufacturing.
• Off-highway.
• Oil refineries.
• Power transmission.
Example applications include:
• Industrial Pumps.
• Electric Motors.
• Compressors & Vacuum Pumps.
• Engine Seals.
• Agricultural Machinery Seals.
• Domestic Appliances
| Item |
(d) Shaft Diameter |
(D) Outer Diameter |
(b) Width |
| MS6X16X5 |
6 mm |
16 mm |
5 mm |
| MS6X16X7 |
6 mm |
16 mm |
7 mm |
| MS6X22X7 |
6 mm |
22 mm |
7 mm |
| MS7X16X7 |
7 mm |
16 mm |
7 mm |
| MS7X22X7 |
7 mm |
22 mm |
7 mm |
| MS8X16X7 |
8 mm |
16 mm |
7 mm |
| MS8X18X5 |
8 mm |
18 mm |
5 mm |
| MS8X18X7 |
8 mm |
18 mm |
7 mm |
| MS8X22X7 |
8 mm |
22 mm |
7 mm |
| MS8X22X7V |
8 mm |
22 mm |
7V mm |
| MS8X24X7 |
8 mm |
24 mm |
7 mm |
| MS9X18X7 |
9 mm |
18 mm |
7 mm |
| MS9X22X7 |
9 mm |
22 mm |
7 mm |
| MS9X26X7 |
9 mm |
26 mm |
7 mm |
| MS10X19X7 |
10 mm |
19 mm |
7 mm |
| MS10X22X7 |
10 mm |
22 mm |
7 mm |
